• Assist machine operators with setup, operation, and monitoring of forging and CNC machines
• Load and unload raw materials and finished parts
• Perform basic machine tending tasks and keep production running efficiently
• Inspect parts to ensure they meet quality standards
• Use basic measuring tools such as calipers or gauges when needed
• Maintain a clean, safe, and organized work area
• Follow all company safety policies and procedures
• Report equipment issues, defects, or safety concerns to supervisors
• Support production goals and help minimize downtime
• 
  

• Industrial setting with exposure to noise, heat, and moving machinery
• Smoke-free facility (no smoking permitted anywhere on-site)
• Employees must remain on the premises for the duration of their shift; leaving the building or going to personal vehicles during breaks is not allowed

• Steel-toed shoes or boots
• Safety glasses
• Hearing protection
• Jeans with no rips, holes, or tears

• High school diploma or equivalent preferred
• Previous manufacturing experience is a plus, but not required
• Ability to follow directions and work well with a team
• Strong attention to detail and quality
• Willingness to learn and take initiative
• Reliable attendance and punctuality

• Ability to lift up to 50 lbs as needed
• Ability to stand and move for extended periods
• Comfortable performing repetitive tasks in a fast-paced environment

• 3rd Shift 11 PM-7AM 
• Pay : $32.75 / hour

• Troubleshoot mechanical, electrical, hydraulic, pneumatic and logic systems.
• Fabrication and welding of metal structures.
• Responsible for securing, leveling, aligning and the mechanical hookups during machine installations.
• Must have the ability to take projects from perception or idea without a blueprint to completion, developing diagram as wok progresses. Use power tools, bench tools, wrenches, carpentry, etc.
• Must work closely with safety director to assure compliance with OSHA and Federal Regulations.
• Required to work with variety of hand tools including welding and power brake presses.
• Required to perform machine repair work as indicated and as time permits. 
• Maintain a high degree of quality and safety.
• Ability to train, instruct and assist trainees through the training period.
• Install and maintain the electrical systems of the plant to provide power for machines, equipment, lighting, facilities and other electrical apparatus and gear. 
• Install and wire centralized control panels, layout and wire distribution centers and circuits, machine tool controls and switches, electrical control and timing devices, lighting systems, etc., to conform with involved engineering specifications and schematic drawings.
• Diagnose, isolate and correct electrical troubles to involve repair and replacements of controls, motors, switches, devices, and gears, re-routing of circuits and distribution centers to balance loads, etc.
• Make emergency repairs when necessary to offset excessive downtime and production delays.

• High School diploma or equivalent 
• Associates degree, maintenance certification (or working toward degreed program)
• 2-5 years’ experience in maintenance related field
• Able to operate mobile, mechanical equipment in compliance with OSHA standards
• Complete certification and be issued a forklift and equipment license
• Able to reach, bend, twist, reach overhead, and operate equipment; climb platforms or scaffolding and work at ceiling heights
• Basic computer skills 
• Ability to regularly lift 40 lbs. and occasionally lift to 70 lbs.
• Good verbal and written communication skills

• 1st Shift
• Compensation is from 45,760 USD to 52,000 USD per year

• Lead, coach, and develop a team of production team members.
• Plan and coordinate daily department activities to meet production schedules.
• Monitor productivity, quality, and efficiency while ensuring customer specifications are met.
• Promote and enforce all company safety policies and OSHA regulations.
• Conduct daily shift meetings and communicate production goals, expectations, and updates.
• Identify process improvement opportunities to reduce waste and increase efficiency.
• Monitor attendance, performance, and team member engagement.
• Assist with team member training, onboarding, and cross-training initiatives.
• Collaborate with Maintenance, Engineering, Quality, and other departments to resolve production issues.
• Ensure proper use of equipment, tools, and materials.
• Maintain accurate production records and reports.
• Support continuous improvement initiatives using Lean Manufacturing principles.
• Address team members' concerns professionally and promote a positive team environment.

• Required
  • High school diploma or GED.
  • 3+ years of manufacturing experience.
  • 2+ years of leadership or supervisory experience in a manufacturing environment.
  • Strong organizational, communication, and problem-solving skills.
  • Ability to read production schedules, work instructions, and manufacturing documentation.
  • Proficiency with Microsoft Office and basic computer systems.
  • Ability to work in a fast-paced environment while managing multiple priorities.
• Preferred
  • Experience in trailer, automotive, RV, or heavy equipment manufacturing.
  • Knowledge of Lean Manufacturing, 5S, or Continuous Improvement methodologies.
  • Experience with welding, fabrication, assembly, or production processes.
  • Associate's degree or technical certification is a plus.

• Install plumbing systems including PEX, water supply lines, winterization drains, water heaters, and pumps
• Install and test plumbing fixtures such as sinks, faucets, toilets, vent pipes, and fresh water connections
• Assist with general construction and assembly of mobile restroom trailers
• Inspect and test systems to ensure proper functionality
• Work collaboratively with team members to meet production goals
• Follow safety procedures and maintain a clean work environment
• Document completed work as needed

• Previous plumbing, construction, manufacturing, or mechanical experience preferred
• Experience working with PEX, water heaters, and pumps strongly preferred
• Ability to use hand tools and basic power tools
• Basic mechanical aptitude
• Strong attention to detail and quality
• Ability to lift up to 50 lbs and perform physical job duties
• Reliable attendance and strong work ethic
• Ability to work independently and as part of a team

• Plumbing: 1+ year preferred
• Construction or Manufacturing: 1+ year preferred
• Trailer, RV, or mobile unit experience is a plus but not required

• Temp-to-hire opportunity with long-term potential
• Growing company with stable work
• Hands-on, team-oriented environment
• Opportunity to learn new skills and grow

• 1st Shift
• Pay : $18 / hour

• Surface Preparation: Clean, sand, and prepare metal surfaces for coating application, ensuring the removal of all contaminants and imperfections to guarantee optimal adhesion.
• Coating Application: Apply protective coatings, including primers and topcoats, undercoatings, polyureas, and spray foam using specialized equipment to achieve a high-quality finish.
• Fabrication :Perform secondary metal fabrication tasks including welding, cutting, and shaping of metal components as needed to support the assembly of structural elements.
• Quality Control: Inspect fabricated parts for quality, structural integrity, and accuracy. Inspect coated surfaces for thickness, coverage, and defects, ensuring that all finishes meet project specifications.
• Tool & Equipment Use: Safely operate fabrication tools such as welders,grinders,saws,andothermachineryneededtocompletefabricationtasks.
• Collaboration: Work closely with other teams (e.g., plumbing, electrical, and construction) to ensure that fabricated parts are properly integrated into the final product.
• Safety & Compliance: Follow all safety guidelines and protocols to maintain a safe working environment and ensure compliance with industry regulations.

• Coating Expertise: Strong experience in spray foam and other paint applications.
• Fabrication Expertise: Strong experience in metal fabrication ,including MIG welding, cutting, grinding, and assembling metal components.
• Blueprint Reading: Ability to interpret technical drawings and blueprints to ensure precise fabrication and integration of components.
• Attention to Detail: A keen eye for quality, ensuring that all fabricated parts meet exact specifications and are free of defects.
• Problem-Solving: Skilled in identifying and resolving issues that a rise during the fabrication process to keep production on track.
• Physical Endurance: Ability to perform physically demanding tasks, including handling heavy materials and working in a variety of positions.
• Teamwork: Ability to collaborate effectively with other technicians and departments to meet production timelines and quality standards.
• Safety Awareness: Knowledge of safety standards in fabrication and welding, with a strong commitment to maintaining a safe work environment.

• 1st Shift 6 AM-6:15 PM (3-2-2 schedule)
• Compensation is from 52,000 USD to 64,480 USD per year

• Carry out repairs to all types of equipment and facilities in a safe, timely and professional manner
• Troubleshoot defective equipment in order to isolate causes and make repairs
• Follow instructions given by Maintenance supervisor on shift
• Complete daily walk through inspections on equipment in assigned area
• Complete run time and down time PM’s on equipment in assigned areas
• Track time through work order completion
• Assist with troubleshooting production process issues as needed
• Keep all work areas clean and tidy – including tools & tool box
• Update supervision, staff and operators, both verbally and via written reports, on the status of equipment maintenance issues
• Promote a team environment
• Work in a safety-first manner while adhering to all LOTO, Arc Flash, Confined Space and Environmental policies
• Respond to internal & external customers in a timely manner

• High School Diploma or equivalent required
• Associate degree in a maintenance or technical field preferred
• 2 Years of experience in industrial maintenance
• Valid driver’s license required for business travel
• Demonstrated knowledge of Robotic programming is
  preferred but not required
• Knowledge of PLC logic troubleshooting is preferred but
  not required

• 1st and 2nd Shift
• Compensation is dependent upon experience

• Perform major and minor repairs to plant equipment to plant equipment as required to keep plant running productively and effectively.
• Use proficiently all hand and power tools, measuring instruments, diagnostic instruments with the performance of maintenance duties.
• Perform mechanical and electrical repairs including troubleshooting PLC, sensors and PID loops.
• Read and accurately interpret hydraulic, electrical and mechanical prints and drawings.
• Use arc welder and oxy-acetylene torch.
• Layout and construct jigs and fixtures for use in production operations.
• Maintain all machinery, equipment, building components, in accordance with manufacturers’ specifications.
• Be a participant on Emergency Response Team. Wear necessary PPE for chemical cleanup requiring a respirator.
• Install and maintain feeder and branch circuit wiring including single and three phase systems.
• Layout and install rigid and EMT, IMC, conduit systems for feeder and branch circuit wiring in accordance with National Electrical Code and approved practices.
• Know the requirements and interpretations of the National Electrical Code and be able to apply the knowledge.
• Monitor and maintain plant service equipment consisting of air conditioning and heating systems, hot and chilled water circulation systems, chiller, cooling tower, boiler, feed water system, water softening system, air compressors, etc.

• Previous Manufacturing Experience Preferred
• Must have High School diploma, GED, or Journeyman Card
• Must have minimum 4 years experience as a maintenance millwright and electrician
• Two year technical degree preferred

• 1st Shift: 6-2:30 PM
• Compensation is from 52,000 USD to 72,800 USD per year

• Perform maintenance and repairs on a variety of plant equipment and facility-related systems in a safe, timely, and professional manner
• Troubleshoot equipment issues to identify root causes and complete necessary repairs
• Conduct daily walkthrough inspections of equipment and assigned areas
• Perform preventative maintenance during scheduled run-time and downtime periods
• Assist with troubleshooting production and facility-related issues as needed
• Follow maintenance instructions and priorities provided by the Maintenance Supervisor
• Document work through work orders and accurately track time and completed repairs
• Communicate equipment and maintenance issues to supervisors, staff, and operators through verbal and written updates
• Maintain clean, organized work areas, tools, and equipment
• Support a team-oriented maintenance environment
• Follow all safety procedures, including LOTO, Arc Flash, Confined Space, and Environmental policies
• Respond to internal and external maintenance requests in a timely manner
• Help identify opportunities to improve equipment reliability and overall facility operations

• High School Diploma or equivalent required
• Associate degree in maintenance or a related technical field preferred
• 2+ years of industrial maintenance experience
• Ability to troubleshoot both electrical and mechanical issues
• Hands-on approach to troubleshooting and problem solving
• Ability to work independently and as part of a team
• Valid driver's license required for business travel
• Robotic programming knowledge preferred, but not required
• PLC logic troubleshooting knowledge preferred, but not required

• 1st 6AM-2 PM and 2nd Shift 2-10PM + OT
• Pay is from 28.50 USD / hour

• Follow all plant safety procedures and guidelines without exception
• Maintain a positive attitude with customers and fellow employees to foster a team concept
• Troubleshoot; diagnose; and repair mechanical, hydraulic, and electrical systems.
• Utilize maintenance system for creating and completing work orders.
• Control downtime by supporting operations associates of routine preventative maintenance and operation techniques and monitor compliance.
• Carry out maintenance process per supervisor instructions expeditiously and perform tasks in a professional manner.
• Support workflows, effective layout, and optimum process conditions.
• Provide P.M. for facilities, equipment and production equipment.
• Suggest modifications and improvements to PM.
• Accurately document time and materials on PM forms or work order.
• Determine possible maintenance problems, identify, and repair.
• Review and provide input on new and existing facility equipment.
• Support cost savings and process improvement programs for the manufacturing site.
• Support housekeeping programs for the manufacturing site.
• Executes other duties/tasks as assigned by management leadership
  
  

• High School or equivalent
• Manufacturing maintenance technician experience (preferred)
• Knowledge of industrial maintenance and building maintenance methods.
• Able to read standard blueprints.
• Communication skills that will allow technical to ordinary communication.
• Electrical troubleshooting, repair, and installations
• Hydraulic systems maintenance repair and installations
• Pneumatic systems maintenance repair and installations
• Welding (stick, tig, or mig) is a plus
• Must be able to multi-task.
• Forklift Certified - General Production that assists in product movement only.

• 1st Shift
• Pay is from 24 USD / hour

• Read and interpret blueprints, specifications, and work instructions to determine machining requirements
• Set up, program, and operate CNC lathes, including Mazak equipment
• Load, unload, and monitor parts throughout the machining process
• Perform first-piece and in-process inspections using calipers, micrometers, indicators, and other measuring tools
• Adjust machine controls as needed to maintain quality standards and tolerances
• Assist with process improvements and development of standard operating procedures
• Provide technical support and guidance to team members when needed
• Work closely with production leadership to identify opportunities for continuous improvement
• Maintain a clean, organized, and safe work area
• Operate a forklift to move and organize materials and finished products

• High School Diploma or GED
• Minimum of 5 years of CNC turning and programming experience
• Experience programming Mazak lathes required
• Strong understanding of tooling, tool maintenance, and machining practices
• Ability to read and use OD and ID micrometers
• Experience indicating parts using a 4-jaw chuck
• Clausing lathe experience is a plus
• Strong blueprint reading and inspection skills
• Ability to convert fractions and decimals accurately
• Excellent time management and organizational skills
• Reliable team player with a strong work ethic

• 1st Shift Monday-Thursday 6-4 PM + Possible OT on Friday
• Compensation is from 43,680 USD to 56,160 USD per year

• Maintain a safe work environment in your area.
  • Ensure that you are wearing the proper PPE, the equipment in your area, (grinders, machinery, welders, hand tools, etc.) are all safe to be used and properly guarded.
  • Notify safety coordinator or Shop Superintendent of any unsafe equipment or practices.
  • Work in compliance with OSHA safety rules.
  • Keep your area clean and organized.
• Set up and operate hydraulic presses and shear equipment for established work.
• Select correct tooling, load, install and correctly set up the tools required to produce the correct bends and cuts required per customer order specifications.
• Great Math skills used for set up from prints to break press and shear
• Perform assigned work to time standards and quality expectations.
• Safely operate a forklift to handle materials and completed work.
• Make routine decisions and use problem solving to resolve basic manufacturing issues.
• Basic ability to read and understand blueprints and other shop drawing aids.
• Report and document basic material, production and quality control issues. Perform basic dimensional measuring using measurement tools.
• Participate in equipment preventative maintenance at the operator level.
• Follow oral and written directions.
• Perform other duties as assigned by the supervisor as needed.

• High School diploma, GED or equivalent
• Three (3) year experience fabricating. Possessing a solid understanding of welding equipment and welding accessories
• Read, write and communicate using English language sufficient to perform job functions

• Operate bolt-forming machinery to produce fasteners according to specifications. 
• Load and feed raw materials into machines. 
• Monitor machines during production and make basic adjustments as needed. 
• Inspect finished bolts and fasteners for quality, size, and proper formation. 
• Use measuring tools and gauges to verify products meet specifications. 
• Identify defective or improperly formed parts and remove them from production. 
• Maintain a clean and organized work area. 
• Follow all company safety procedures and production guidelines. 
• Complete required production and quality paperwork. 
• Perform basic machine cleaning and routine maintenance as directed. 
• Communicate any machine issues or quality concerns to the supervisor. 
• Meet production and quality standards while maintaining a strong focus on safety. 

• Previous manufacturing or machine operating experience is preferred but not required. 
• Mechanical aptitude and willingness to learn machinery. 
• Ability to read and follow written and verbal instructions. 
• Strong attention to detail. 
• Reliable attendance and dependable transportation. 
• Ability to work effectively as part of a team. 
• Previous experience with fasteners, cold forming, presses, or similar manufacturing equipment is a plus. 

• Ability to stand and walk for extended periods. 
• Ability to frequently use hands and fingers for handling materials and finished products. 
• Ability to lift, carry, push, and pull materials as required. 
• Ability to perform repetitive motions throughout the shift. 
• Must be able to work safely around manufacturing equipment and machinery. 
• Must be able to wear required personal protective equipment (PPE).
• #portland

• Training: 1st Shift | 7:00 AM–3:30 PM for at least three months
• Regular Schedule: 3rd Shift | 11:00 PM–7:30 AM, Monday–Friday

• Starting around $30.00/hour, based on experience
• Additional $1.50/hour premium for 3rd shift
• Performance bonuses of up to $5,000 per year
• Annual pay increases
• Medical, dental, vision, and life insurance
• 100% 401(k) match up to 10% of your pay
• Paid holidays and vacation
• Paid time off from Christmas Eve through New Year’s Day
• Free uniforms

• Troubleshoot and repair mechanical and electrical equipment
• Perform preventive maintenance and equipment upgrades
• Diagnose machinery issues and minimize production downtime
• Recommend improvements to equipment and manufacturing processes
• Maintain a safe, clean, and reliable production environment

• At least three years of industrial maintenance experience preferred
• Strong mechanical and/or electrical troubleshooting skills
• Manufacturing experience or a solid hands-on mechanical background, such as automotive or farm equipment repair
• Dependable problem-solving skills and the ability to work independently
• A stable work history and interest in building a long-term career
• Must live within a reasonable commuting distance of Berne, IN

• Set up and operate multiple-spindle CNC machines.
• Monitor machines during production to ensure they are operating properly.
• Load and unload materials and finished parts.
• Perform machine adjustments and make tooling changes as needed.
• Inspect finished parts to ensure they meet quality specifications.
• Use measuring equipment such as calipers, micrometers, gauges, and other inspection tools.
• Read and follow work instructions, process standards, and control plans.
• Identify quality issues and make appropriate adjustments to maintain product specifications.
• Maintain a clean and organized work area.
• Follow all company safety and quality procedures.
• Work independently while maintaining production goals and quality standards.

• High school diploma or equivalent preferred.
• Previous CNC, machining, or manufacturing experience is helpful but may not be required.
• Strong mechanical aptitude.
• Ability to read and follow detailed instructions.
• Good attention to detail and ability to recognize quality issues.
• Basic understanding of measuring tools and inspection equipment.
• Reliable attendance and dependable work habits.
• Willingness to learn and train on different equipment or shifts if needed.
• Ability to work independently and as part of a team.

• Ability to stand and walk for extended periods.
• Ability to repeatedly handle and move materials and finished parts.
• Ability to perform repetitive tasks while maintaining attention to detail.
• Ability to safely operate machinery and use required tools and equipment.
• #portland

• Process orders via the company’s software for shipping and receiving and complete necessary documentation. Communicate and work effectively with all members of the department in addition to other internal and external contacts.
• Perform various other assignments per lead person or manager direction.
• Must be a team player and work in fast pace office.
• Maintain positive attitude in stressful situations. 
• Attention to detail and accuracy is essential. Must be able to multi-task.
• Basic computer skills, with strong knowledge of Excel.

• One-year basic shipping experience in a fast-paced Manufacturing environment a plus, but not required.
• Ability to identify problems, collect information, and suggest solutions.
• Can speak and understand basic English with an emphasis on complying with directions, fundamental shop safety procedures, and production standards.
• Professional communication skills, in person, on phone and through company email. 
• Reading and writing skills with an emphasis on understanding and completing Shipping documentation.
• Ability to effectively communicate, present information and respond to questions from colleagues and shipping customers. 
• Self- starter, dependable, energetic, with positive attitude.
• Flexible and adaptable as workload progresses. 

• Frequent standing, sitting, and use of hands in this support role is required
• Able to walk unassisted on production floor for lengthy intervals 
• Occasionally perform physical activities including lifting (up to 50 lbs. unassisted)

• Safely operate a forklift and roll clamp to transport paper rolls and other production materials.
• Load, unload, move, and stage materials throughout the facility.
• Position paper rolls and materials accurately for production use.
• Deliver materials to production areas as needed to keep operations running efficiently.
• Remove finished materials and properly return or stage products for storage or shipment.
• Inspect loads and equipment before operation and report any safety or equipment concerns.
• Properly secure and handle materials to prevent damage.
• Maintain accurate inventory and material locations when required.
• Follow all company safety policies, procedures, and operating guidelines.
• Maintain a clean and organized work area.
• Communicate effectively with production, warehouse, shipping, and supervisory personnel.
• Assist with general material-handling duties as needed.
• Work efficiently while maintaining a high level of accuracy and attention to detail.
• Perform other duties as assigned.

• Previous forklift experience required; roll-clamp (company will train)
• Ability to safely maneuver a forklift in a busy production environment.
• Experience handling large or heavy rolls/materials is a plus.
• Must be proficient in basic math and computer skills
• Ability to read and follow work instructions.
• Strong attention to detail and safety awareness.
• Dependable attendance and punctuality.
• Ability to work independently and as part of a team.
• Good communication skills.
• Willingness to work overtime and Saturdays as needed.
• Previous manufacturing, warehouse, printing, or material-handling experience is preferred.

• Must be able to stand and walk for extended periods.
• Must be able to frequently reach, bend, stoop, kneel, and crouch.
• Must be able to safely operate a forklift for extended periods.
• Must be able to lift and move materials as required.
• Must be able to work safely around moving equipment and machinery.
• Must be able to work in a fast-paced production environment.
• #portland

• Operate bolt-forming machinery to produce fasteners according to specifications. 
• Load and feed raw materials into machines. 
• Monitor machines during production and make basic adjustments as needed. 
• Inspect finished bolts and fasteners for quality, size, and proper formation. 
• Use measuring tools and gauges to verify products meet specifications. 
• Identify defective or improperly formed parts and remove them from production. 
• Maintain a clean and organized work area. 
• Follow all company safety procedures and production guidelines. 
• Complete required production and quality paperwork. 
• Perform basic machine cleaning and routine maintenance as directed. 
• Communicate any machine issues or quality concerns to the supervisor. 
• Meet production and quality standards while maintaining a strong focus on safety. 

• Previous manufacturing or machine operating experience is preferred but not required. 
• Mechanical aptitude and willingness to learn machinery. 
• Ability to read and follow written and verbal instructions. 
• Strong attention to detail. 
• Reliable attendance and dependable transportation. 
• Ability to work effectively as part of a team. 
• Previous experience with fasteners, cold forming, presses, or similar manufacturing equipment is a plus. 

• Ability to stand and walk for extended periods. 
• Ability to frequently use hands and fingers for handling materials and finished products. 
• Ability to lift, carry, push, and pull materials as required. 
• Ability to perform repetitive motions throughout the shift. 
• Must be able to work safely around manufacturing equipment and machinery. 
• Must be able to wear required personal protective equipment (PPE).
• #portland

• Operate CNC and/or manual machining equipment to produce parts according to blueprints and specifications
• Machine parts to required tolerances and quality standards
• Inspect parts using precision measuring tools such as micrometers, calipers, and gauges
• Perform basic hand operations including filing, fitting, and scraping
• Change worn inserts or tooling and reset tool lengths
• Assist with machine setups and fixture installation/removal
• Make basic tool adjustments and machine coordinate changes as needed
• Record labor and production data in the system
• Maintain clean machines and work areas

• Previous machining experience (CNC or manual machines)
• High School Diploma or GED
• Ability to pass background check
• Ability to read and interpret blueprints and technical drawings
• Experience with machine setups, tooling adjustments, and fixtures
• Familiarity with precision measuring instruments
• Trade school certification in machining or equivalent work experience preferred
• Strong attention to detail and mechanical aptitude

• Competitive pay
• Benefits package available
• Paid time off
• Retirement plan options
• Opportunities for growth and advancement

• Supervise and support daily production operations on 2nd shift
• Lead and assign work to production associates to meet output and quality goals
• Train, coach, and evaluate team members to support performance and development
• Monitor production schedules, machine changeovers, and workflow efficiency
• Troubleshoot production issues and support maintenance when needed
• Ensure compliance with safety, quality, and company procedures
• Assist with root cause analysis and continuous improvement initiatives
• Maintain a safe, organized, and efficient production environment

• Previous supervisory experience in a manufacturing environment
• Strong troubleshooting and problem-solving skills
• Ability to lead teams and keep production running efficiently
• Mechanical or electrical knowledge preferred
• Experience in die casting, CNC machining, or manufacturing assembly highly preferred
• Familiarity with ISO 14001 or IATF 16949 quality systems is a plus
• High School Diploma or GED required; technical or manufacturing degree preferred

• $55,000–$70,000 salary, depending on experience
• Bonus potential in addition to base salary
• Direct hire position with long-term growth opportunities
• Full benefits package, including medical, dental, vision, and retirement plans
• Stable Monday–Friday schedule with overtime as needed

• Supervise and support daily production operations on 3rd shift
• Lead and assign work to production associates to meet output and quality goals
• Train, coach, and evaluate team members to support performance and development
• Monitor production schedules, machine changeovers, and workflow efficiency
• Troubleshoot production issues and support maintenance when needed
• Ensure compliance with safety, quality, and company procedures
• Assist with root cause analysis and continuous improvement initiatives
• Maintain a safe, organized, and efficient production environment

• Previous supervisory experience in a manufacturing environment
• Strong troubleshooting and problem-solving skills
• Ability to lead teams and keep production running efficiently
• Mechanical or electrical knowledge preferred
• Experience in die casting, CNC machining, or manufacturing assembly highly preferred
• Familiarity with ISO 14001 or IATF 16949 quality systems is a plus
• High School Diploma or GED required; technical or manufacturing degree preferred

• $55,000–$70,000 salary, depending on experience
• Bonus potential in addition to base salary
• Direct hire position with long-term growth opportunities
• Full benefits package, including medical, dental, vision, and retirement plans
• Stable Monday–Friday schedule with overtime as needed

• Supervise and support daily activities of a 6-person QC lab team
• Guide Gemba investigations, PPAP submissions, audits, and root cause analysis
• Handle non-conformance reports and customer communications (some travel required)
• Conduct audits per IATF 16949
• Maintain training plans, control plans, and check sheets
• Prepare customer-facing quality reports and support quality compliance systems
• Manage schedules, timekeeping, and team development

• Bachelor’s degree in industrial technology, metrology, or related field or equivalent experience
• 4+ years in automotive manufacturing or a related field
• Six Sigma Green Belt or CQE a plus
• Knowledge of IATF 16949, SPC, PFMEA, and MSA
• Strong leadership and communication skills
• Proficiency in Excel, Minitab, PowerPoint, and technical documentation

• 1st Shift
• $50,000–$60,000/year salary, based on experience
• Direct hire with benefits

• Support the Quality Control department’s operational and strategic goals
• Assist QC supervisors with daily quality operations and compliance monitoring
• Lead and mentor quality team members to support performance and development
• Conduct root cause investigations and internal audits including Gemba walks
• Prepare and submit customer quality reports (8D, corrective actions, capability studies)
• Communicate with customers and suppliers regarding quality issues
• Review and approve abnormal tags, sorting activities, and gauge validations
• Provide technical support for QA equipment and measurement systems
• Ensure compliance with IATF 16949 and ISO 14001 quality standards
• Promote a culture of continuous improvement and accountability

• Bachelor’s degree in Industrial Technology, Engineering, Metrology, or related field (or equivalent experience)
• 5+ years of experience in automotive manufacturing quality
• Strong knowledge of SPC, MSA, PFMEA, and Control Plans
• Experience with 8D problem solving, 5-Why analysis, and corrective actions
• Proficiency with Minitab, Excel, and quality reporting tools
• Experience working within IATF 16949 quality systems
• Strong leadership, communication, and technical writing skills

• Six Sigma Green Belt or CQE certification
• Previous quality leadership or supervisory experience

• Direct hire position
• Competitive salary: $60,000–$70,000
• Full benefits package
• Stable 1st shift schedule
• Opportunity to grow your career with a global automotive manufacturer

• Diagnose and repair CNC machines (including lathes and mills such as Hurco and Mazak)
• Perform preventative maintenance on production equipment, facility systems, and grounds
• Troubleshoot and repair both mechanical and electrical issues with minimal supervision
• Repair manual machines including lathes, mills, and saws
• Identify, source, and assist with ordering replacement parts
• Read and interpret blueprints and schematics to complete maintenance tasks
• Safely operate forklifts, boom lifts, and scissor lifts
• Perform routine safety and environmental checks
• Work closely with Machine Service Technicians and support plant-wide maintenance needs
• Use and maintain hand tools, measuring devices, and maintenance equipment

• High school diploma or equivalent
• 2–3 years of hands-on mechanical and electrical maintenance experience
• Working knowledge of industrial electrical systems and plant maintenance practices
• Understanding of state electrical code preferred
• Ability to troubleshoot and complete repairs with minimal direction
• Ability to read and interpret blueprints and schematics
• Skilled in the use of precision hand tools and measuring equipment
• Must provide personal tools required for the role
• Strong mechanical aptitude and problem-solving skills
• Ability to meet physical requirements of the position and pass a background check

• Direct hire – start with the company right away
• Steady 1st shift schedule with consistent hours
• Work on a variety of equipment (CNC and manual machines)
• Opportunity to expand both mechanical and electrical skillsets
• Stable, long-term position with a reputable manufacturing company

• Set up, operate, and run CNC machines for precision part production
• Machine parts to exact tolerances based on complex blueprints
• Load, edit, and adjust CNC programs to match tooling and job requirements
• Select proper tooling and make adjustments based on material and application
• Inspect parts using calipers, micrometers, and gauges to ensure quality standards
• Troubleshoot machining, tooling, and material issues independently
• Perform hand finishing work such as filing, fitting, and scraping
• Record labor and production data accurately
• Maintain a clean, organized, and safe work environment

• High School Diploma or equivalent required
• Trade school certification or equivalent hands-on machining experience preferred
• Advanced CNC machining experience (setup + program editing required)
• Ability to read and interpret complex blueprints independently
• Strong understanding of tooling selection and machining applications
• Proven ability to troubleshoot and adjust programs, tooling, and processes
• Strong math skills and attention to detail
• Ability to pass a background check

• Direct hire – no temp period
• Competitive pay based on experience
• Comprehensive health benefits
• Retirement plan options
• Paid time off
• Long-term stability with a well-established company
• Opportunities for advancement and continued skill development

• Set up and operate multiple-spindle CNC machines.
• Monitor machines during production to ensure they are operating properly.
• Load and unload materials and finished parts.
• Perform machine adjustments and make tooling changes as needed.
• Inspect finished parts to ensure they meet quality specifications.
• Use measuring equipment such as calipers, micrometers, gauges, and other inspection tools.
• Read and follow work instructions, process standards, and control plans.
• Identify quality issues and make appropriate adjustments to maintain product specifications.
• Maintain a clean and organized work area.
• Follow all company safety and quality procedures.
• Work independently while maintaining production goals and quality standards.

• High school diploma or equivalent preferred.
• Previous CNC, machining, or manufacturing experience is helpful but may not be required.
• Strong mechanical aptitude.
• Ability to read and follow detailed instructions.
• Good attention to detail and ability to recognize quality issues.
• Basic understanding of measuring tools and inspection equipment.
• Reliable attendance and dependable work habits.
• Willingness to learn and train on different equipment or shifts if needed.
• Ability to work independently and as part of a team.

• Ability to stand and walk for extended periods.
• Ability to repeatedly handle and move materials and finished parts.
• Ability to perform repetitive tasks while maintaining attention to detail.
• Ability to safely operate machinery and use required tools and equipment.
• #portland

• 2nd and 3rd Shift
• Compensation is from 37,440 USD to 45,760 USD per year

• Must be able to learn and understand programming logic 
• Understand in blueprint reading / geometric tolerance interpretation 
• Adjust machine set-ups (tool changes, chucking force, etc) and programs
         (offset, dwell, rpm, feed-rate, etc) 
• Maintain equipment by cleaning machine, assisting in lube, & clean out scrap bins.
• Complete statistical data sheets.
• Operate 6+ machines.
• Troubleshoot including minor maintenance: Be able to replace main parts
         (collets, guide bushings, belts, ejection rods, toggles, etc) 
• May operate End Cut machines along with CNC machines.

• Minimum one year of CNC Swiss type automatic lathe experience 
• Prior experience with Fanuc program controls and edits (M code and G code). 
• Detail oriented & able to multi-task
• Math skills required up to algebra level
• High School Diploma Required

• Review the slit schedule, setup sheet, and customer order to confirm coil width, number of mults, coil weight, ID/OD, wrap direction, and packaging requirements.
• Build the recoiler arbor: install and space separator discs, spacer rings, and rubber stripper rings per the setup sheet, verifying spacing with proper gauges.
• Assist with knife, spacer, and shim changes on the slitter head and with tooling changes on the tension stand.
• Set up and adjust the tension stand (felt pads, rollers, or overarm separator) as directed.
• Verify scrap/edge-trim winders or choppers are set for the correct trim width.
• Position exit coil car, turnstile, or unloading equipment for the run.

• Thread strip ends onto the recoiler mandrel; set gripper slots, belt wrapper, or clamping devices and start the coil wrap.
• Monitor coil build throughout the run for telescoping, dish, weaving, loose or crossed wraps, and edge alignment; alert the operator to correct tension, alignment, or tracking.
• Inspect strip during the run for burrs, slivers, camber, edge wave, scratches, coil breaks, dents, and dimensional variance; stop the line and notify the operator or supervisor when defects appear.
• Take and record width, gauge, and burr measurements at required intervals using micrometers, tape, calipers, and go/no-go gauges.
• Watch the scrap winder or chopper and clear jams safely; keep the scrap pit and line area clear.
• Assist with coil changes at the entry end (uncoiler) as needed, including banding removal and threading.

• Band and strap finished coils using steel or plastic strapping, seals, tensioners, and edge protectors per packaging standards.
• Remove separator discs and spacers; strip completed coils from the arbor.
• Apply coil tags, labels, and identification; verify heat numbers and lot traceability against paperwork.
• Wrap, skid, and package coils per customer requirements (VCI paper, stretch wrap, wood skids, eye-to-sky or eye-to-side).
• Move and stage coils to designated locations using overhead crane with C-hook or coil lifter, or forklift with coil ram.
• Record production data: coil numbers, weights, footage, scrap, downtime, and quality checks.

• Follow all lockout/tagout procedures before clearing jams, changing tooling, or entering guarded areas.
• Wear all required PPE at all times, including cut-resistant gloves and sleeves, safety glasses or face shield, hearing protection, and metatarsal safety boots.
• Maintain a clean, organized work area; perform end-of-shift cleanup, scrap removal, and basic operator-level maintenance and lubrication.
• Report unsafe conditions, near misses, and equipment problems immediately.
• Participate in shift handoff communication and safety meetings.

• Cross-train on recoiler operator, uncoiler, and packaging positions as directed.
• Perform other duties as assigned by the Operator or Supervisor.

• High school diploma or GED, or equivalent work experience.
• Ability to read and understand work orders, setup sheets, tape measures, micrometers, and calipers.
• Basic math skills including fractions, decimals, and unit conversion.
• Ability to follow verbal and written instructions and safety procedures precisely.
• Willingness to work overtime, weekends, and rotating shifts as required.

• 6 months to 2 years of experience in a steel service center, coil processing, metal stamping, or similar manufacturing environment.
• Prior experience on a slitting line, cut-to-length line, or with coil handling equipment.
• Current or ability to obtain overhead crane and forklift certification.
• Familiarity with steel grades, gauge tolerances, and common coil defects.
• Experience with an ERP/production tracking system for entering production data.

• Stand and walk on concrete for the full shift (8–12 hours).
• Frequently lift, carry, push, and pull up to 50 lbs; occasionally up to 75 lbs with assistance.
• Repeatedly bend, stoop, squat, kneel, reach overhead, and climb stairs or platforms.
• Handle separator discs, spacers, banding, and tooling with sustained grip strength.
• Sufficient vision (with correction) to inspect strip surfaces and read gauges and tags.
• Sufficient hearing (with protection) to respond to alarms, horns, and verbal direction in a high-noise environment.

• Operate machinery safely and efficiently according to company standards
• Monitor machines during operation to ensure quality and consistency
• Perform routine checks to ensure product quality and accurate specifications
• Follow production instructions and standard operating procedures (SOPs)
• Maintain a clean and organized work area
• Report any issues or malfunctions to the supervisor immediately
• Adhere to all safety guidelines and company policies

• High attention to detail and strong focus on quality
• Willingness to learn and follow instructions
• High School Diploma or Equivalent Preferred
• Good work ethic and ability to work independently or in a team
• Basic math and measurement skills
• Comfortable standing for extended periods and performing repetitive tasks
• Preferred: Prior experience in a manufacturing or production setting

• Onsite training — no prior machine operation experience necessary
• Stable, full-time employment
• Opportunities for advancement and skill development
• Supportive team environment
• Health Insurance, 401K, Vacation

• Accurately picking orders based on priority and ensuring precision in order fulfillment. 
• Safely pulling items from designated pallets, maintaining a safe working environment for all employees. 
• Taking accountability for unlabeled or damaged cases by reporting and addressing them appropriately. 
• Overseeing the repack room operations, ensuring products are repacked efficiently and returned to inventory in a timely manner. 
• Following instructions from the department supervisor to maintain workflow and operational efficiency. 
• Always adhering to company policies and compliance standards. 

• 1st Shift: 7:00 AM–3:00 PM, Monday–Friday
• Straight 8-hour paid shift with a 30-minute lunch
• Overtime is currently limited, typically five hours or less per week
• Overtime may involve working 9-hour days after training is completed
• Training generally takes approximately 30–60 days

• $25.00–$35.00 per hour, based on experience and skill level

• Set up and operate Star and Citizen Swiss-style CNC lathes
• Complete setups involving bar feeders, guide bushings, tooling, and offsets
• Read and interpret engineering drawings, specifications, and GD&T callouts
• Perform first-piece and in-process inspections
• Use micrometers, calipers, pin gauges, comparators, and other precision measuring tools
• Adjust feeds, speeds, offsets, and tooling to maintain tight tolerances
• Monitor production for tool wear, quality issues, and out-of-tolerance conditions
• Perform tool changes, insert indexing, and minor tooling modifications
• Complete job travelers, inspection records, and production documentation
• Troubleshoot setup, tooling, and machining issues
• Maintain a clean and organized work area following 5S standards
• Work closely with Quality and Engineering on new jobs and process improvements
• Assist with training less-experienced machinists as needed

• Two or more years of Swiss-style CNC lathe experience is strongly preferred
• Experience with Star, Citizen, Tsugami, or similar Swiss equipment is a plus
• Ability to independently complete setups from raw material through first-piece approval is highly preferred
• Strong entry-level candidates with CNC machining experience and the ability to grow into independent setups may be considered
• Ability to read engineering drawings and understand GD&T
• Proficiency with precision measuring instruments
• Experience holding tight tolerances
• Strong mechanical aptitude and attention to detail
• High school diploma or equivalent
• Experience machining titanium, stainless steel, or cobalt chrome is a plus
• Medical device, aerospace, or other regulated manufacturing experience is preferred

• Competitive pay based on experience
• Consistent first-shift schedule
• Limited overtime
• Temp-to-hire opportunity with weekly pay
• Stable, long-term position
• On-the-job training and opportunities for advancement

• 1st Shift: 7:00 AM–3:00 PM, Monday–Friday
• Straight 8-hour paid shift with a 30-minute lunch
• Overtime is currently limited, typically five hours or less per week
• Overtime may involve working 9-hour days once fully trained
• Training generally takes approximately 30–60 days

• Independently set up CNC mills, lathes, and machining centers
• Complete setups from raw stock through first-part approval
• Select and mount tooling, fixtures, and workholding equipment
• Load, verify, and edit CNC programs
• Program offsets and make adjustments to maintain tight tolerances
• Read and interpret complex engineering drawings and GD&T callouts
• Perform and document first-article and in-process inspections
• Identify tooling wear and make proactive corrections
• Troubleshoot dimensional, tooling, and surface-finish issues
• Maintain setup sheets, job travelers, and work instructions
• Coordinate job transitions to minimize changeover time
• Work with CAD/CAM programmers on new or complex job launches
• Support and mentor less-experienced machinists
• Assist with improvements involving setup time, scrap, and process efficiency
• Follow all quality and production documentation requirements

• At least two years of CNC setup experience on mills and/or lathes
• Ability to independently complete setups and achieve first-part approval
• Experience with 3-axis or multi-axis CNC equipment
• Strong engineering print-reading and GD&T skills
• Working knowledge of G-code programming and editing
• Experience selecting and applying cutting tools
• Proficiency with precision measuring instruments
• Strong troubleshooting skills and attention to detail
• High school diploma or GED preferred
• Ability to pass a pre-employment drug screen and background check

• Four or more years of complex CNC setup experience
• Multi-axis machining experience
• Advanced G-code programming and editing skills
• Fixturing and workholding design experience
• CAM software experience with Mastercam, Fusion 360, or similar programs
• Medical device, aerospace, or other tight-tolerance manufacturing experience
• Previous training, mentoring, or process-improvement experience

• Competitive pay based on experience
• Consistent first-shift schedule
• Limited overtime
• Temp-to-hire opportunity with weekly pay
• Stable, long-term position
• Opportunities for continued growth and advancement

• Read and interpret blueprints, drawings, and fabrication specifications
• Fit and weld structural and metal components with precision
• Perform MIG, TIG, Stick, or other welding processes as needed
• Measure, align, tack, and assemble materials accurately
• Inspect finished welds for quality and consistency
• Work independently while meeting production goals
• Follow all safety procedures and PPE requirements 

• Previous experience as a Welder / Fitter
• Ability to work with minimal fixturing
• Comfortable reading tape measures and blueprints
• High attention to detail and pride in workmanship
• Must be able to pass an on-site weld test
• High School Diploma / GED preferred
• Dependable attendance and strong work ethic 

• Steel-toed shoes required
• Hearing protection required
• Eye protection required
• Jeans and t-shirts permitted

• Direct hire opportunity
• Benefits available
• Three-day weekends most weeks
• Overtime potential
• Stable company with long-term opportunity
• Great company culture

• Pay: $22-27/hr (based on experience)
• Shift: Monday–Friday, 7:30 AM–4:00 PM

• Fabricate and install truck upfits — including wiring, hydraulics, and equipment installations
• Perform automotive-type electrical work on trucks and related equipment
• MIG weld steel (up to ¾â€“1 inch)
• Apply your mechanical skills to ensure safety, precision, and durability
• Work as part of a talented team that takes pride in craftsmanship and customer satisfaction

• Strong mechanical aptitude and hands-on experience with tools
• Enjoys working on trucks and taking on mechanical challenges
• Problem-solver with a “figure it out” mindset
• Dependable, motivated, and team-oriented
• Ability to lift/carry up to 75 lbs

• Direct hire position — not temp-to-hire
• Steady weekday hours, no weekends
• Work with industry-leading brands and a skilled, supportive team
• Build something you can be proud of every day

• Operate machinery safely and efficiently according to company standards
• Monitor machines during operation to ensure quality and consistency
• Perform routine checks to ensure product quality and accurate specifications
• Follow production instructions and standard operating procedures (SOPs)
• Maintain a clean and organized work area
• Report any issues or malfunctions to the supervisor immediately
• Adhere to all safety guidelines and company policies

• High attention to detail and strong focus on quality
• Willingness to learn and follow instructions
• High School Diploma or Equivalent Preferred
• Good work ethic and ability to work independently or in a team
• Basic math and measurement skills
• Comfortable standing for extended periods and performing repetitive tasks
• Preferred: Prior experience in a manufacturing or production setting

• Onsite training — no prior machine operation experience necessary
• Stable, full-time employment
• Opportunities for advancement and skill development
• Supportive team environment
• Health Insurance, 401K, Vacation

• Safely operate a forklift to move, load, and organize materials
• Perform data entry and cycle counting to maintain accurate inventory records
• Assist with shipping and receiving as needed
• Follow safety procedures and maintain a clean work area

• Forklift certification required
• Detail-oriented with strong organizational skills
• Ability to work independently and as part of a team
• Reliable and punctual

• Monday-Friday 6-3 PM
• Pay : $25 / hour

• Provide excellent customer service and respond to customer questions and requests
• Communicate with customers by phone, email, and other methods as needed
• Enter, update, and maintain customer and company information accurately
• Use Microsoft Excel to organize information, track data, and prepare reports
• Use QuickBooks for day-to-day business and customer-related tasks
• Maintain accurate records and documentation
• Assist with invoicing, billing, payments, and other administrative duties
• Coordinate information between customers and internal departments
• Stay organized while managing multiple priorities and deadlines
• Identify and resolve customer issues in a professional and timely manner
• Perform other administrative and customer service duties as needed

• Previous customer service, accounting, bookkeeping, or administrative experience
• Strong Microsoft Excel skills required
• QuickBooks experience required
• Excellent organizational and time-management skills
• Strong attention to detail and accuracy
• Excellent verbal and written communication skills
• Ability to multitask and prioritize in a fast-paced environment
• Professional, dependable, and customer-focused attitude
• Ability to work independently and as part of a team

• 1st Shift
• Compensation is from 49,920 USD to 62,400 USD per year

• Assist the facility manager in the investigation of accidents/injuries within the department, including timely documentation of any department injuries or unsafe working conditions.
• Adhere to organizational safety requirements (personal protective equipment, etc.).
• Monitor facility housekeeping / department organization within scope of responsibility.
• As part of normal maintenance routine, conduct regular inspection tours of the facility to detect existing or potential accidents and / or health hazards. Where applicable, determine corrective or preventive actions, alert facility manager and follow-up to ensure measures have been implemented.
• Assist facility manager to document findings related to facility housekeeping tours
• Maintain an accident prevention attitude among all personnel.
• Ability to work with MES and ERP systems as required.
• Ability to work with Limble work order system.
• Assume ownership of assigned equipment within the scope of responsibility.
• Troubleshoots and repairs manufacturing equipment and systems.
• Perform regular and preventive maintenance on equipment based on production work orders entered into Limble to eliminate unscheduled downtime.
• Initiate purchase of required tools, parts, and materials and maintain accountability for tools issued.
• Make recommendations for equipment upgrades and modifications, as well as mechanical safety procedures.
• Analyzes mechanical and operational problems on equipment, plans for and takes corrective action.
• Makes necessary corrections and adjustments to maintain maximum production and quality.
• Reviews production schedule and when equipment is not scheduled for manufacturing, performs scheduled maintenance and logs PM into Limble tracking system.
• Tests equipment to check operation, tries out equipment after repairs, changeovers or extended downtime.
• Examine defects and analyze, where possible, take corrective action; analyzes and records cause of production delays on daily shift reports.
• Notifies manager of recurring equipment malfunctions and corrective action taken, and of quality problems or supplies needed.
• Maintenance and repair of facility and grounds.
• Rigging and moving equipment.
• Installation of equipment and fixtures.
• Repair and maintenance of building (painting, door, hole patching, filter changes, etc.).
• Light fabrication and construction.
• Responsible for maintaining cleanliness of maintenance shop.

• High school diploma
• Technical certificate
• Prior Electrical troubleshooting and basic schematic reading is a must. (110/240/480 3-phase)

• Basic computer skills as needed (i.e. Microsoft Office Word, Excel and Outlook).
• Forklift certified
• 3 to 5 years maintenance experience in a manufacturing environments

• Setting rotary die to print registration
• Monitors print quality during production run to ensure quality standards
• Holding accuracy and attention to detail, verifying processes and work performed
• Providing excellent communication, customer service and good team working skills
• Maintain accurate production records, logs, and reports
• Calibrate equipment as needed and perform routine cleaning and preventive maintenance
• Troubleshoot and resolve minor machine issues or escalate to maintenance when necessary
• Maintaining an organized, safe and clean work environment
• Working independently and within a team, in a fast-paced production environment
• Ensure compliance with company policies, procedures, and safety regulations

• Prefer 1+ year experience in Flexographic Printing. 
• Ability to read and interpret work orders, technical documents, and machine manuals
• Strong attention to detail and quality control skills
• Good problem-solving skills and mechanical aptitude
• Resourceful and willing to independently learn new skills and techniques associated with the operation of equipment
• Ability to stand for long periods and lift up to 75 lbs
• Willingness to work in shifts, including nights or weekends if required

• 1st and 2nd Shift
• Pay is from 19.40 / hour 

• Set-up, operate and troubleshoot equipment to produce thermoformed parts and implement solutions to complex process problems.
• Understand and apply principles to operate machinery and equipment independently
• Ensure maximum efficiency of machine set-up.
• Inspect and perform routine maintenance and cleaning of the machinery, equipment and facility.
• Assist with development of new product and processes.
• Train new operating technicians.
• Ensure part quality meets established standards and identify issues that adversely affect product requirements and communicate with the appropriate departments.
• Identify nonconforming materials, product and records while working with shift leaders or quality systems personnel for resolution.
  
  
  

• Mechanical aptitude
• A minimum of three (3) years experience operating thermoforming equipment
• Ability to run all department machine platforms at expert level
• Must be able to speak and read English to meet safety, training and quality requirements

• Monday-Friday 6:30-3 PM
• Compensation is from 39,520 USD to 43,680 USD per year

• Count and verify material inventory at the end of a job and turn into warehouse manager to adjust system
• Update & send out 24-hour material email
• Help change material over at the press when needed
• Pick and load material into dryers stated on the work order
• Stage material in material area or warehouse for others to fill barrels from
• Clean dryers and grinders

• Inventory knowledge/Cycle counting
• Leadership
• ERP Knowledge
• Warehouse experience
• Forklift experience
• Computer knowledge

• 1st and 2nd Shift
• Compensation is from 41,600 USD to 47,840 USD per year

• Installing the correct molds/inserts into the correct machines
• Prepping and mixing raw materials for production
• Cleaning dryers
• Cleaning grinders
• Cleaning machine hoppers
• Cleaning machine off; put all tools away after changeover
• Using the correct tools for the job
• Answering machine alarms
• Identifying and reporting issues and potential issues to the Plant Manager
• Changing tools over according to which model is needed
• Fixing part defects
•  Fixing machine faults
• Adding oil and lubricating fluid to machines as needed
• Changing machine fan filters
• Comply with all company policies and procedures
• Provide support to meet department and company objectives
• Able to communicate effectively and respectfully with machine operators and
   Quality

• Monday-Friday 7-4 PM
• Compensation is from 52,000 USD to 80,000 USD per year

• Monitor inventory levels and identify purchasing needs to maintain appropriate stock levels and customer service.
• Research and evaluate potential vendors, products, and services.
• Compare vendor offers based on price, quality, service, reliability, terms, and delivery capabilities.
• Negotiate and manage contracts, pricing, terms, and policies with suppliers.
• Develop and maintain strong relationships with reliable vendors.
• Determine purchasing quantities and delivery timing to maximize inventory efficiency.
• Monitor and forecast upcoming demand and communicate potential shortages or pricing concerns to the Sales Manager and sales team.
• Prepare cost analyses and identify opportunities for cost reductions and savings.
• Prepare purchase orders, solicit bids, and review requests for bids and services.
• Enter and maintain purchasing data accurately within company and vendor systems.
• Oversee and support the Assistant Purchasing Agent.
• Develop and implement purchasing procedures and strategies to improve efficiency.
• Manage inventory to reduce scrap and improve inventory turns.
• Direct and coordinate purchasing activities involving materials, equipment, machinery, and supplies.
• Analyze purchasing and operational data to evaluate current and projected effectiveness.
• Monitor applicable laws, regulations, and purchasing requirements.
• Work closely with warehouse personnel to ensure materials arrive safely and in good condition.
• Assist with customer phone calls and counter sales as needed.
• Attend trade shows and industry events to stay current on market and industry trends.
• Travel to company branch locations and/or vendor locations as needed.
• Operate company and vendor purchasing software effectively.

• Minimum of 5 years of purchasing/procurement experience.
• High school diploma or GED required.
• Bachelor’s degree in Supply Chain Management, Logistics, Accounting, Business Administration, or a related field preferred.
• Strong proficiency with Microsoft Office.
• Excellent organizational and time-management skills.
• Strong leadership, communication, negotiation, and problem-solving skills.
• Strong mathematical and analytical abilities.
• Ability to read, write, and communicate effectively in English.
• 3+ years of electrical industry or electrical product experience preferred.
• Valid driver’s license required.

• Attach spine labels to books and compact discs
• Sort cards and labels
• Apply Mylar/Kapco protective covers to book jackets
• Perform stamping and theft identification procedures
• Audit processed materials for accuracy and quality
• Follow all safety guidelines and work instructions
• Perform other duties as assigned

• At least 6 months of previous work experience
• Reading and writing skills at a high school level
• Basic arithmetic skills, including addition and subtraction
• Basic computer skills
• Strong attention to detail
• Ability to perform repetitive manual tasks
• Ability to work independently and as part of a team
• Ability to multitask and adapt to changing workflow demands
• Ability to meet and maintain production standards
• Reliable attendance
• Ability to safely work in a warehouse environment

• Walk and stand continuously throughout the assigned shift
• Lift and carry up to 35 lbs.
• Push and pull materials in a warehouse environment, with force requirements up to 45 lbs.
• Grip and grasp continuously
• Bend, squat, kneel, twist, turn, climb, crawl, and reach above shoulder level as needed
• Perform typing and keyboarding as required
• Work in a range of temperatures
• Work overtime when required, including time before or after the scheduled shift and/or weekends

• Read and interpret blueprints, drawings, and fabrication specifications
• Fit and weld structural and metal components with precision
• Perform MIG, TIG, Stick, or other welding processes as needed
• Measure, align, tack, and assemble materials accurately
• Inspect finished welds for quality and consistency
• Work independently while meeting production goals
• Follow all safety procedures and PPE requirements 

• Strong previous experience as a Welder / Fitter
• Ability to work with minimal fixturing
• Comfortable reading tape measures and blueprints
• High attention to detail and pride in workmanship
• Must be able to pass an on-site weld test
• High School Diploma / GED preferred
• Dependable attendance and strong work ethic 

• Steel-toed shoes required
• Hearing protection required
• Eye protection required
• Jeans and t-shirts permitted

• Direct hire opportunity on 1st shift
• Benefits available
• Three-day weekends most weeks
• Overtime potential
• Stable company with long-term opportunity
• Great company culture

Job Summary

1. Sets up, operates, and monitors assigned production machinery (Cold Forming/Draw, Shear, Threading, Stress Relief, Bending, or Finish) according to job specifications
2. Loads and unloads raw material and finished parts safely and efficiently
3. Inspects parts throughout the production run using gauges, calipers, and other measuring instruments to verify conformance to specifications
4. Makes minor machine adjustments and reports equipment malfunctions or quality concerns to the supervisor or maintenance team
5. Maintains accurate production, quality, and downtime records
6. Follows all safety procedures, wears required PPE, and keeps the work area and machinery clean and organized

1. Performs other duties as assigned

1. Basic mechanical aptitude and a good work ethic
2. Ability to read and use basic measuring instruments (tape measure, calipers, micrometers)
3. Basic math skills – addition, subtraction, and measurement conversions
4. Attention to detail and commitment to producing quality parts
5. Ability to read, understand, and follow written and verbal work instructions
6. Ability to work safely and adhere to safety guidelines in a manufacturing environment
7. Ability to perform repetitive manual tasks for extended periods, independently or as part of a team
8. Ability to be flexible, adapt to changing production demands, and maintain reasonably reliable attendance

1. High school diploma or equivalent preferred
2. Prior machine operation or manufacturing experience preferred, but not required – willing to train candidates with basic mechanical skills and a good work ethic

1. Ability to stand and walk continuously during the assigned shift
2. Ability to lift/carry up to 50 lbs occasionally
3. Ability to push/pull, grip/grasp, and perform repetitive hand and arm motions continuously
4. Ability to bend, squat/kneel, twist/turn, and reach above shoulders frequently
5. Ability to work near moving machinery, with exposure to elevated noise, varying temperatures, and machine lubricants/coolants
6. Ability to work the assigned shift, including occasional overtime as required

• Perform quality inspections and testing to ensure products meet established specifications and standards
• Conduct routine quality testing, including pH, viscosity, color, and other product-specific measurements
• Complete pre-operational inspections and environmental monitoring
• Monitor production processes for quality and compliance
• Maintain accurate quality records, documentation, scanning, and filing
• Monitor GMP, HACCP, sanitation, and quality procedures throughout the facility
• Identify quality or compliance concerns and assist with corrective actions
• Investigate quality discrepancies, audit findings, and customer complaints to help determine root cause
• Develop and update SOPs, operating procedures, and quality-related documentation
• Provide training and support to employees regarding quality systems, GMPs, policies, and procedures
• Assist with preparation for internal, third-party, regulatory, and customer audits
• Work closely with production and other departments to maintain consistent quality standards

• High school diploma or GED required
• Previous Quality Assurance, Quality Control, or related manufacturing experience strongly preferred
• Familiarity with GMPs, HACCP, quality systems, or audit processes is a plus
• Strong attention to detail and ability to accurately complete documentation
• Comfortable using Microsoft Word, Excel, and other basic computer programs
• Ability to read and follow written procedures, safety requirements, and operating instructions
• Strong problem-solving and communication skills
• Ability to work independently while also partnering with production and other departments

• Full-time, consistent 1st shift schedule
• Monday–Friday hours
• Competitive pay of $22–$26/hr based on experience
• Benefits available
• Opportunity to use and grow your quality assurance experience with an established local manufacturer

• 2nd Shift: 2 PM - 10:30 PM | 2 openings
• Temp-to-Hire | $16.00/hr starting pay, increasing to $18.00/hr upon direct hire
• Overtime is currently limited but may vary based on production needs.
• Temp-to-hire after 520 hours

• Lay carbon fiber material into molds according to work instructions.
• Prepare materials and molds for production.
• Follow established production processes and procedures.
• Vacuum bag parts before they are placed in the oven.
• Inspect parts for quality throughout the lay-up process.
• Perform repetitive hands-on production tasks.
• Maintain a clean, organized, and safe work area.
• Work with team members to meet daily production goals.
• Follow all safety and quality requirements.

• High school diploma or GED required.
• No previous composite or manufacturing experience required.
• Reliable and dependable with good attendance.
• Strong attention to detail.
• Comfortable working with your hands.
• Able to follow written and verbal instructions.
• Willing to learn and accept feedback.
• Able to work well as part of a small team.
• Manufacturing experience is a plus, but not required.

• Ability to stand for most of the shift.
• Ability to perform repetitive work with your hands.
• Ability to lift 40–75 lbs., with heavier lifting required at times.
• Ability to perform physical production tasks safely and efficiently.

• Steel-toe boots
• Jeans
• T-shirt
• Hearing protection
• Eye protection

• 1st Shift: Monday-Friday, 8:00 AM-5:00 PM
• Pay starting at $23/hr
• Company vehicle provided for on-site service calls
• Training provided

• Provide technical support and service to customers by phone and on-site
• Learn to troubleshoot equipment issues and identify solutions
• Travel to customer locations using a company vehicle stocked with the necessary tools
• Complete service calls in a professional and timely manner
• Build positive relationships with customers by providing friendly, dependable service
• Work alongside an experienced service team and learn from other technicians
• Complete service documentation and maintain accurate records
• Continue developing technical knowledge through hands-on training and experience

• Entry-level candidates are encouraged to apply!
• Recent graduates and candidates with technical/trade school experience are welcome
• Dependable and motivated with a willingness to learn
• Enjoys working with their hands and figuring out how things work
• Strong communication and customer service skills
• Comfortable working independently and traveling to customer locations
• Organized, professional, and detail-oriented
• Previous technical or field service experience is a plus, but not required — we will train!

• Follow all work instructions, including all Lockout/Tagout (LOTO) procedures.
• Set up presses correctly and according to required specifications.
• Troubleshoot issues with press automation and make necessary adjustments.
• Set and adjust press and automation parameters to maintain efficient production.
• Install and connect automation tooling, including bars, grippers, fittings, auto-lube sprayer tooling, nozzles, and fittings.
• Safely enter the press area when required to complete tooling installation and adjustments.
• Monitor product quality through audit inspections, gauging processes, and completion of inspection records.
• Communicate equipment, production, and quality concerns to the Lead Operator and Supervisors.
• Operate a forklift to safely move loads exceeding 10,000 lbs.
• Safely load, set, and connect dies using a forklift.
• Follow all company safety procedures and 5S policies and protocols.
• Maintain a clean and organized work area.
• Perform other duties as assigned.

• At least 1 year of factory/manufacturing experience.
• High school diploma or GED.
• Ability to regularly lift up to 40 lbs.
• Basic math skills.
• Good mechanical aptitude and ability to troubleshoot equipment.
• Dependable and punctual with a strong work ethic.
• Ability to follow written and verbal instructions.
• Ability to work independently and as part of a team.
• Willingness to work mandatory overtime as needed.

• Non-smoking facility.
• Cell phones are not permitted on the production floor.
• Must be willing to follow all safety, quality, and production policies.

• Load and unload plate material from the plasma burn table using an overhead crane and forklift
• Safely rig, lift, and position steel plate for cutting operations
• Mark cut parts with correct part numbers immediately as they come off the table
• Verify part numbers against work orders/cut sheets for accuracy
• Learn to set up and operate the plasma burn table, including reading cut programs and basic machine functions
• Report directly to the Burn Table Operator and follow daily production priorities
• Maintain a clean and organized work area around the burn table, including scrap removal
• Follow all safety procedures related to crane operation, forklift operation, hot material handling, and PPE use
• Communicate material shortages, quality issues, or equipment problems to the Burn Table Operator promptly
• Assist with other material handling or shop duties as assigned

• 1st Shift Monday-Friday 7-3:30 PM
• Compensation is from 41,600 USD to 62,400 USD per year

• Operate manual lathes, mills, and grinders to machine parts to exact specifications.
• Read and interpret blueprints, sketches, and CAD files to determine machining operations required.
• Set up and adjust machinery to ensure accurate and efficient production.
• Perform routine maintenance on machining equipment to keep machines in proper working order.
• Inspect finished parts for quality, ensuring they meet specified tolerances and dimensions.
• Collaborate with engineers and other team members to optimize machining processes.
• Maintain a clean and safe work environment, adhering to all safety protocols

• At least 2 years’ experience running manual lathes and mills
• Able to read and interpret various prints
• Able to observe machine operation to detect out of tolerance machine and adjust accordingly
• Valid driver's license
• Able to work in various environments
• Able to work overtime as needed
• Able to pass a drug screen

• 1st Shift: 6:00 AM – 2:30 PM |
• Overtime is currently limited but may vary based on production needs.
• Temp-to-hire after 520 hours

• Lay carbon fiber material into molds according to work instructions.
• Prepare materials and molds for production.
• Follow established production processes and procedures.
• Vacuum bag parts before they are placed in the oven.
• Inspect parts for quality throughout the lay-up process.
• Perform repetitive hands-on production tasks.
• Maintain a clean, organized, and safe work area.
• Work with team members to meet daily production goals.
• Follow all safety and quality requirements.

• High school diploma or GED required.
• No previous composite or manufacturing experience required.
• Reliable and dependable with good attendance.
• Strong attention to detail.
• Comfortable working with your hands.
• Able to follow written and verbal instructions.
• Willing to learn and accept feedback.
• Able to work well as part of a small team.
• Manufacturing experience is a plus, but not required.

• Ability to stand for most of the shift.
• Ability to perform repetitive work with your hands.
• Ability to lift 40–75 lbs., with heavier lifting required at times.
• Ability to perform physical production tasks safely and efficiently.

• Steel-toe boots
• Jeans
• T-shirt
• Hearing protection
• Eye protection

• 9-panel drug screen
• Comprehensive background check
• Indiana Department of Correction (IDOC) search
• Sex Offender Registry search
• Candidates may be able to begin work before the background check is completed.

• 3rd Shift Monday-Thursday 9 PM-7:30 AM
• Compensation is from 49,920 USD to 58,240 USD per year

• Operate and set up CNC machining equipment, with a primary focus on CNC mills
• Read and interpret work instructions, blueprints, and specifications
• Use micrometers and other precision measuring equipment to inspect parts
• Monitor tooling and identify dull or worn tools
• Change tooling as needed to maintain part quality
• Perform hands-on deburring of machined parts
• Carefully inspect and deburr your own parts without damaging critical features, dimensions, or finishes
• Maintain quality standards and ensure parts meet required tolerances
• Troubleshoot basic machining and tooling issues

• Previous hands-on CNC machining and setup experience required
• CNC mill experience strongly preferred
• Experience using micrometers and other precision measuring tools
• Ability to recognize tooling issues and change tools as needed
• Previous hands-on deburring experience required
• Strong understanding of precision machining, tolerances, and part quality
• CNC lathe and/or grinder experience is a plus

• Assemble components and products for concrete mixer trucks using hand and power tools 
• Install factory and vendor-supplied parts to complete machinery 
• Read and interpret engineering drawings, blueprints, and material specifications 
• Perform basic shop math to ensure accurate measurements and assembly 
• Maintain quality and safety standards throughout the assembly process 

• 2–3 years of assembly or manufacturing experience 
• Ability to lift up to 40 lbs on a regular basis 
• Comfortable working with minimal supervision 
• Steel-toed boots/shoes required 
• High school diploma or GED

• Monday–Thursday: 5:30 AM – 4:00 PM
• Overtime is likely available on Fridays

• Receive, inspect, and store raw materials, components, and finished products.
• Deliver materials to production areas to keep manufacturing running efficiently.
• Safely load, unload, and transport materials using forklifts, pallet jacks, and other material handling equipment.
• Perform inventory counts and help maintain accurate inventory records.
• Record material movements using inventory management software.
• Support Lean manufacturing initiatives, including 5S and Kanban practices.
• Work closely with production, quality, and shipping teams to meet daily production goals.
• Maintain a clean, organized, and safe work environment.

• Previous experience as a Material Handler, Forklift Operator, Shipping & Receiving Associate, or in a similar manufacturing role.
• Manufacturing or industrial experience required.
• Forklift experience is required; prior certification is a plus.
• Basic computer skills and experience with inventory or warehouse systems.
• Strong attention to detail and organizational skills.
• Ability to work independently and as part of a team.
• Ability to lift, carry, and move materials throughout the workday.

• Direct Hire opportunity
• Four-day workweek with overtime opportunities
• Weekly pay
• Comprehensive benefits package including medical, dental, vision, life insurance, 401(k) with company match, paid holidays, paid time off, and Employee Assistance Program
• Stable company with opportunities for long-term growth and advancement

• Inputting customer orders into an order entry system
• Pulling small orders for walk-in customers
• Helping customers find the parts they need
• Building quotes for customers with pricing and availability of the parts they need
• Building relationships with customers and companies by assisting them each day with their orders
• Helping customers with tool selections
• Other duties as assigned

• 401(k)
• 401(k) matching
• Dental insurance
• Employee discount
• Health insurance
• Paid time off
• Tuition reimbursement
• Vision insurance

• 1st and 2nd Shift
• Pay is from 25 USD / hour

• Preventive Maintenance — Regularly scheduled maintenance tasks to prevent equipment failures and ensure smooth operations. 
• Troubleshooting â€” Quickly diagnosing and resolving machinery issues to minimize downtime and maintain productivity.
• Repair – Basic repair of mechanical equipment, knowledge of electrical systems, hydraulics and pneumatics, conveyors, air lines, etc.
• Equipment Improvements â€” Overseeing enhancements and modifications to existing machinery to improve performance and efficiency.
• Safety Compliance — Ensuring all maintenance activities adhere to safety regulations and standards to protect workers and equipment.

• 2+ years of industrial maintenance experience in a manufacturing environment preferred.
• Ability to troubleshoot and repair mechanical, electrical, hydraulic, and pneumatic systems.
• Experience working with conveyors, motors, gearboxes, air lines, pumps, and other production equipment.
• Basic knowledge of electrical systems, including reading schematics, is a plus.
• Welding and fabrication experience is helpful but not required.
• Ability to use hand and power tools safely and effectively.
• Strong troubleshooting and problem-solving skills with the ability to work independently.
• Ability to lift up to 50 pounds and stand, walk, bend, and climb throughout the shift.
• Willingness to work overtime as needed.

• Perform tasks related to carpentry, metal polishing, and surface finishing 
• Prepare parts and materials for painting and final production 
• Operate and safely use hand and power tools 
• Measure and cut materials accurately using a tape measure 
• Inspect finished products to ensure quality standards are met 
• Maintain a clean and organized work environment 
• Follow all safety procedures and company guidelines 

• Prior trade experience preferred (carpentry, polishing, or similar hands-on work) 
• Comfortable using hand and power tools 
• Ability to read and use a tape measure accurately 
• Strong attention to detail 
• Self-motivated, reliable, and willing to learn new skills 
• Ability to work independently and as part of a team 

• Ability to lift up to 50 lbs (lifting equipment required for heavier items) 
• High School Diploma or GED preferred 
• Must pass a 5-panel drug screen 
• Background check required (IDOC/Sex Offender registry; felonies considered on a case-by-case basis) 

• 401(k) plan 
• Health insurance

• $22.00-$24.00/hour, based on experience
• +$3.00/hour shift premium for 2nd shift
• Monday-Thursday | 4:00 PM - 2:30 AM
• Overtime is frequently available on Fridays

• Operate laser cutting machines to produce quality metal parts
• Read and interpret blueprints, drawings, and work instructions
• Set up and adjust machine settings for accurate production
• Inspect finished parts to ensure they meet quality standards
• Perform basic machine maintenance and troubleshooting
• Keep your work area clean, organized, and safe
• Work with the production team to meet daily goals

• Previous experience operating laser cutting equipment or similar CNC machinery
• Ability to read blueprints and technical drawings
• Strong attention to detail and commitment to quality
• Mechanical aptitude with the ability to perform basic troubleshooting
• Dependable work ethic and ability to work independently
• High school diploma or GED (technical training is a plus)

• Direct hire opportunity with a stable employer
• Competitive pay plus shift premium
• Consistent 4-day workweek
• Overtime opportunities to increase your earnings
• Opportunity to join a growing manufacturing team with long-term career potential

• Read and interpret blueprints, drawings, and fabrication specifications
• Fit and weld structural and metal components with precision
• Perform MIG, TIG, Stick, or other welding processes as needed
• Measure, align, tack, and assemble materials accurately
• Inspect finished welds for quality and consistency
• Work independently while meeting production goals
• Follow all safety procedures and PPE requirements 

• Previous experience as a Welder / Fitter
• Ability to work with minimal fixturing
• Comfortable reading tape measures and blueprints
• High attention to detail and pride in workmanship
• Must be able to pass an on-site weld test
• High School Diploma / GED preferred
• Dependable attendance and strong work ethic 

• Steel-toed shoes required
• Hearing protection required
• Eye protection required
• Jeans and t-shirts permitted

• Direct hire opportunity
• Benefits available
• Three-day weekends most weeks
• Overtime potential
• Stable company with long-term opportunity
• Great company culture

• 1st Shift 
• Compensation is from 62,400 USD to 72,800 USD per year

• Diagnose and troubleshoot PLC and other automated control systems
• Diagnose and troubleshoot equipment problems, overhaul production machinery and build experimental
• Provides troubleshooting support for manufacturing equipment
• Diagnose and troubleshoot motor/drive controller issues
• Support internal projects

• Required
  • Associate’s degree in electrical engineering or certificate in electrical field of study
  • Proficiency with PCs and Rockwell Automation
  • PLC programming, variable-speed drives, servo-systems, industrial sensors and Relay Ladder Logic
  • Panel-view, Factory Talk, or other operator interface programming
  • Experience completing and documenting preventive and non-routine maintenance
  • Excellent interpersonal, communication and problem solving skills
• Preferred
  • ISO 9001 or 13485, CFR 820
  • Journeyman or Master Electrician License
  • Strong PC Skills - AutoCAD and Microsoft Office applications
  • Ability to adjust, replace and/or repair mechanical drive components, chain & sprockets, pulleys, bearings, and gearboxes
  • Ability to troubleshoot, replace and/or repair solenoids, cylinders, and other pneumatic systems
  • Knowledge of slitting and winding methods, equipment, and procedures

• Assemble AC and DC fuel transfer pumps using hand and power tools
• Wrap hoses and prepare products for shipment
• Read and interpret engineering drawings and material specifications
• Operate machinery to insert foam components
• Safely operate a forklift to move materials and products
• Maintain a clean and organized work area
• Follow all safety guidelines and procedures

• 2–3 years of assembly experience required
• Ability to read and understand technical drawings
• Experience using hand tools and power tools
• Forklift experience preferred (or willingness to be trained)
• Ability to lift 50–70 lbs on a regular basis
• Strong multitasking and time management skills
• High School Diploma or GED required
• Steel-toe shoes/boots required

• Monday – Thursday
• 6:00 AM – 4:30 PM
• Overtime opportunities are frequently available on Fridays

• Perform high-quality MIG welding on steel components.
• Read and interpret blueprints and fabrication drawings.
• Layout, fit, and assemble fabricated parts according to specifications.
• Verify material lengths, dimensions, and hole locations prior to fabrication.
• Operate overhead cranes and forklifts to move materials safely.
• Handle raw materials and fabricated components throughout production.
• Use grinders to prepare and finish welds.
• Operate oxy-fuel cutting torches safely and effectively.
• Maintain quality standards while meeting production deadlines.
• Follow all company safety policies and procedures.
• Work closely with supervisors and team members to ensure production goals are met.

• MIG Welding
• Arc Welding
• TIG Welding
• Plasma Cutting
• Press Brakes
• Shears
• Rolling Equipment
• Industrial Fabrication
• Material Handling
• Crane Operation
• Forklift Operation

• Previous experience in an industrial fabrication environment required.
• Ability to read and interpret blueprints.
• Strong understanding of basic measurements and layout.
• Excellent attention to detail and craftsmanship.
• Ability to work independently and as part of a team.
• High School Diploma or GED preferred.

• Lift up to 75 pounds.
• Ability to work in indoor and outdoor environments and varying weather conditions.
• Ability to climb ladders and stairs.
• Comfortable working at heights.
• Ability to stand, bend, kneel, and perform physical work throughout the shift.

• Steel-toe boots required.
• Jeans and T-shirt are acceptable work attire.
• Hearing and eye protection are required.

• 1st Shift 7AM-7 PM (2-2-3 schedule) 3rd Shift 7PM-7 AM (2-2-3 schedule)
• Compensation is from 54,080 USD to 70,720 USD per year + Overtime

•  Follows plant safety procedures and guidelines
• Know emergency procedures and what to do in the event of power outages, machine failures, workplace
   injuries, etc.
• Wears and utilizes personal protective equipment (PPE) as required
• Understand and identifies Lock-out/Tag-out procedures
• Informs supervisor of safety issues; reports any workplace injury or incident immediately
• Use tools ranging from common hand and power tools to precision measuring instruments and electrical and
   electronic testing devices
• Perform routine preventative maintenance to ensure that machines continue to run smoothly, building
   systems operate efficiently, or the physical condition of buildings does not deteriorate
• Repair or replace defective equipment parts using hand tools and power tools and reassemble equipment
• Diagnose mechanical problems and determine how to correct them, checking blue prints, repair manuals and
   parts catalogs as necessary
• Order parts, supplies and equipment
• Assemble, install or repair wiring, electrical and electronic components, machinery and equipment
• Assists other workers with specific tasks as requested
• Follow plant quality practices including Good Manufacturing Practices, or GMP’s

• High School Diploma (or GED or High School Equivalence Certificate)
• Equipment Maintenance
• Repairing
• Troubleshooting
• Installation
• Electrical and/or mechanical certifications may be required; location specific

1. Perform daily foam tests for the lab.
2. Cut detailed test samples, perform data entry, and issue certificates of compliance to customers.
3. Participate in corrective action teams.
4. Work scheduled and unscheduled overtime, including weekends as needed.
5. Effectively communicate with plant associates and managers.
6. Create and update Job Hazard Analyses (JHAs) and Standard Operating Procedures (SOPs).
7. Follow all safety and housekeeping guidelines.
8. Perform other tasks as assigned by supervision.